||1. Door Assemblies are designed to resist exterior blast pressures, minimum, SDI
A250.8, physical performance Level A, Model 2, with welded edges.
2. Door Assemblies have successfully passed 1.0 “PSI” of Static Pressure Loading
in accordance with ASTM E-330. This pressure was surpassed in both seating and
unseating configurations, these seating pressures, have also passed the
“Out-swing” requirements of, UFC 4-010-01. Large Missile Impact level “D” was
met as well.
3. We are certified under positive pressure testing UL 10 C and ISO 3008, as
well as, IBC 2003, NFPA 80, HMMA 861 and we meet or exceed SDI 100 manufacturing
requirements such as Cycle and Twist protocols.
4. The following table shows the constructions specifications and the criteria
disciplines’ for our Hollow Metal Doors and Frames tested for Hurricane Wind
Loads which carry the “Approved Status” on the Florida Building Commissions” web
site, hppt://www.floridabuilding.org. Door Assemblies described are posted in
Accepted Engineering Practice 2007, ASTM E1300- 2002, ASTM E1886- 2002, ASTM
E1996- 2002, ASTM E330- 2002, TAS 201, 202, & 203-1994, ASTM A250 2002 Verified
By: Wendell W. Haney, P.E. 54158
Click HERE for the Pressure Door PDF Document
Click HERE for the Pressure Door Specification
Click HERE to download the entire door