MEGAMET INDUSTRIES, INC.
metal magicians at
work
Fifty
years' experiences can be just that or it can be one year’s experience
repeated fifty times. One leads
us from the B-24 Liberator to the B-1B
Excalibur. The other produces
only restored B-24s, excellent for museum pieces but worthless for the defense
of our country.
Unencumbered
by resistance to change and unwieldy top heavy corporate structuring, Megamet
Industries, Inc., entered the field with a combined hollow metal experience
of over fifty years. This includes
an AHC and a CDC Apprentice with immediate consultation access to over a
century of hollow metal expertise.
It
has been over thirty years since the United States put a man on the
moon. The technology that enabled
that feat was too good to waste.
It took some time but the 3-D graphic and the microchip discovered
hollow metal and here we are.
We
have not thrown away the old: precision, quality, and craftsmanship. We have
only infused the unerring repeatability, enormous memory and speed of the
microprocessor combined with NC equipment.
Auto
Cad drawings are read into 3-D controllers (Merry-Mech.) translating and
outputting to Strippit CAP 1000 turret punches and Hurco back gauge equipped
press brakes.
Assembly,
when required, is executed by skilled craftsmen using proven shielded wire
welders. All welds are ground
to reproduce surface smoothness without damage to structural qualities of
weld. Materials are cleaned, phosphate coated and given one
shop coat of primer applied by an electrostatic process that insures ionized
bonding of primer with subject material.
Such coating meets or exceeds
ANSI-A224.1.
Megamet. Mega for one
million. We’d like to take
that to the bank. Not this
year. Not for years to
come. But with perseverance,
attention to detail and the growth emanating from a backlog of satisfied
customers, it could well be.
This
we pledge to you. We will never
try to show any gain, no matter how little or how great by the production
of cheapened, slipshod, or defective
work. That you can take to the
bank.
Although young and small,
MEGAMET INDUSTRIES has over fifty years of combined hollow metal experience
including an ARCHITECTURAL HARDWARE CONSULTANT and a CERTIFIED DOOR CONSULTANT
APPRENTICE, along with an experienced attention-to-detail plant
staff.
MEGAMET
INDUSTRIES has incorporated modern philosophies in designing and engineering
a heavy-duty functional steel frame by using 3-D drawing programs (MERRY
MECH. & AUTO-CAD) and automated computerized equipment (2-STRIPPET’S
CAP 1000, AMADA PRESS BRAKE WITH HURCO BACK
GAUGE). Computerized turrets
die-miter the jambs with aligning tabs, and slots in heads for strong tight
corners. Our finishing process
includes phosphate cleaning and an electrostatic paint line that leaves a
smooth durable finish that meets ANSI/A224.1.
Megamet
Industries, Inc. is a full NAAMM (HMMA Division) member and adheres to its
manufacturing procedures.
Steel
Door Institute standard SDI-100 will be followed and NAAMM standard HMMA-860
- 865 will be followed.
ALL SERIES
LISTED HERE AND MUCH MORE ARE AVAILABLE FIRE RATED “UL” OR
“WARNOCK HERSEY”.
We
offer quick ship lead-times and can match any hardware locations you may
need.